A total start again process allowing freedom to over engineer. Reinventing the Ultimate Amplifier, utilising years of experience…Available now!
A total start again process allowing freedom to over engineer. Reinventing the Ultimate Amplifier, utilising years of experience…Available now!
PRODUCT DESCRIPTION
– 2 channels of 500W @ 4 Ohms | 250W @ 8 Ohms, Ultra high fidelity amplification
– Brand New “ground up” design
– “Ultra Sigma” design topology
– Fully DC Coupled input to output
– Class A driver stage
– Bringing professional audio home!
**NOTE** Driving loads with a nominal impedance below 4R is not recommended as it may cause overheating but driving speakers with 2-ohm impedance dips that only occur at specific frequencies will not cause any problems. The Ultrafide U500DC remains stable into any load including a dead short however shutdown protection will occur if the output current exceeds 35A which is very likely at impedances below 2-ohms.
Channels | 2 |
---|---|
Input / Output | Fully DC Coupled input to output |
Driver Stage | Class A |
Audio Inputs | 4 |
Input impedance | 10k |
Outputs | 4 |
Output impedance | 25mR |
Voltage Gain | 26dB (x20), 29dB (x26) |
Sensitivity | 2.2v |
Frequency Response | 5Hz-20KHz +/-3dB |
Power (per channel) @ 4R | 500W |
Power (per channel) @ 6R | 333w |
Power (per channel) @ 8R | 250W |
Power (per channel) @ 12R | 200W |
Power Consumption (operational) | 200W average, 1,000W max |
Power Consumption (Idle) | 15W |
Power Consumption (Standby) | 1W |
GET IN TOUCH
If you have any questions or require information about any of our products, please don’t hesitate to get in touch.